T

ULTRA-CONTAINMENT BERM

FOAM WALL MODEL

ULTRA-CONTAINMENT BERM
FOAM WALL MODEL

Category SPILL SOLUTIONS

The Ultra-Containment Berm – Foam Wall Model provides containment for smaller spills, leaks, and drips. The 4” high sidewalls may mean a lesser capacity than its 12” high counterparts but it also means versatility and convenience. The foam wall model has true drive-in and drive-out capability and requires no setup other than the initial deployment.

Additional information

Description

KEY FEATURES AND BENEFITS

Foam section inside of sidewall easily compresses for convenient loading and off-loading.
No set-up required – simply unfold for quick deployment. Folded units require minimal storage space.
Standard material of construction is PVC or Copolymer 2000™.

SIDEWALLS

Foam compresses to allow vehicles or equipment into or out of the Berm.
No set-up required once Berm has been positioned in the field.

REGULATIONS:

EPA 40 CFR 264.175 Containment of Containers Containing Free Liquid.
SPCC – Spill Prevention, Control and Countermeasure Act

Reviews

There are no reviews yet.

Be the first to review “ULTRA-CONTAINMENT BERM
FOAM WALL MODEL”

SET UP AND HANDLING
The following guidelines are provided to ensure that you get the best results.
DEPLOYMENT:
Select a level area and be sure that ground is swept clean of debris and sharp objects. The use of a ground tarp is recommended.
Place the folded Berm at the setup location. Do not drag the folded Berm.
Unfold Berm and position as desired.
If Track Belts are being used, place these in the unit at this time.
The Foam Wall Model Berm is now ready for use.
STORAGE:
Sweep out Berm and be sure that it is dry and free of contaminates.
Store unit in clean dry environment.
REPAIR AND MAINTENANCE:
If a puncture or tear occurs, contact your distributor for a
Repair Kit. Describe the damage to the service representative to ensure receipt of the proper kit.